Small electronic safes are usually put where they are hard to see: in the bottom of a wardrobe, under a stair, bolted to the floor of a cupboard. In a house where flood water came in, that is exactly where the water reached. Once it has gone, the keypad often shows nothing at all.
The code is almost certainly still there
Most electronic safes store the code in a memory that does not need power. When the batteries go flat, the keypad goes dark, but the code is kept. Water can corrode the battery contacts and the small board behind the keypad, but it very rarely wipes the code.
So a blank keypad after a flood usually means one of three things: flat or corroded batteries, wet contacts, or a damaged keypad. The bolts and the lock inside the door are often fine.
Worth trying first
- Fresh batteries. On many safes the battery box is behind the keypad, on the outside. Look for a small cover. Clean any white or green deposit off the contacts with a dry cloth first.
- External power contacts. Some safes have two small terminals or a socket under the keypad, so a battery can be held against them from outside.
- The override key. Many safes come with an emergency key, often behind a cover marked with the maker’s name. It may be in a drawer with the safe’s papers, not in the safe.
Give the keypad a day or two to dry at room temperature before trying again.
Three ways to ruin a wet safe
- No heat. A hair dryer or heater can warp the keypad and its seal, and cooks the board.
- No forcing the handle. On most safes the handle only moves the bolts once the lock has released them. Forcing it bends the linkage and makes opening harder.
- No prising the door. Safe doors are built against exactly that, and you end up with a safe that cannot be opened or repaired.
When it has to be opened
If new batteries and the override key do not work, the safe is opened by someone who can show it is yours. Opening goes through the mechanism first; drilling, when it is needed, is done at the point the maker intended so the safe can usually be repaired. Afterwards the code is changed.
If the insurer is involved, photograph the safe where it stood before it is moved, and keep any parts that are replaced: see what the insurer asks for after flood water. For the rest of the locks in the house, start with a cylinder full of Segura silt, and for the doors that need professional attention, locks after a flood.